Replacement for Belling Gas Cooker Main Oven Thermocouple 1450mm 230100020

This 1450mm main oven thermocouple is replacement for Belling gas cookers using part number 230100020. Positioned beside the oven burner, it senses flame heat and helps keep the flame failure valve open while the burner is lit. A worn thermocouple may be the reason an oven lights but goes out when the control knob is released.

Compare the length and connection of the removed part with this thermocouple; a similar-looking sensor may not seat or reach the burner correctly. The cooker model number is normally on the rating plate inside the oven door opening. This is a gas safety part: a Gas Safe registered engineer must fit it and soundness test the appliance. The flame failure device must never be bypassed.

Key Features:

• Restore Main Oven Flame Sensing - Replacement for Belling gas cookers using a 1450mm main oven thermocouple, this part senses burner heat so the flame failure valve can remain open while the flame is lit.
• Keep The Oven Lit - The new thermocouple responds to flame heat and helps the safety valve hold the gas supply open, putting right an oven that lights but goes out when the control knob is released.
• Maintain Flame Failure Protection - This thermocouple works with the oven safety valve so gas can shut off if the flame goes out. A Gas Safe registered engineer must fit it and soundness test the appliance.
• Match The Burner Fitting - The 1450mm length must reach the main oven burner without straining the connection. A Gas Safe registered engineer should compare the fitting with the part removed from the cooker.

Join thousands of engineers and consumers across the globe who trust in Reliapart spares and accessories to get the job done.