Compatible for Titan 40cm Chainsaw Chain 57 Drive Links TTL758CHN-A CH057

This 40cm chainsaw chain is compatible for Titan TTL758CHN-A electric chainsaws. It has 57 drive links, a 3/8 inch pitch and a 0.050 inch gauge. Match all three specifications to the chain being removed and the saw's guide bar and sprocket before fitting. Bar length alone is not enough to identify the correct chain: a similar-looking 56 drive link chain is a different length. Part number CH057 identifies the chain supplied.

A fresh cutting edge helps the saw work through garden branches and logs where the chain already on the machine has become blunt. Unplug the saw before handling the cutters, then follow the saw maker's instructions for chain direction and tension. Keep the chain lubricated and check its tension regularly during use.

Suitable for Titan TTL758CHN-A 2000W 230-240V electric 40cm chainsaws (338PY).

Key Features:

• Restore A Clean Cutting Edge - This 57 drive link chain is compatible for Titan TTL758CHN-A 40cm electric chainsaws. Match the 3/8 inch pitch and 0.050 inch gauge as well as the link count; a 56 link chain is a different length.
• Match The Chain To The Saw - This chain has a 3/8 inch pitch and 0.050 inch gauge to match the specified sprocket and guide bar. Its 57 drive links determine its length, so the bar length alone cannot confirm fitment.
• Keep The Chain Seated - This chain runs in the guide bar groove when fitted in the correct direction and tensioned to the saw maker's instructions. Unplug the electric saw before handling the cutters, and wear suitable hand protection.
• Restore Steady Cutting - A fresh chain replaces the worn cutting edge on a 40cm guide bar and supports steadier cuts through garden branches and logs when correctly tensioned and lubricated.

Join thousands of engineers and consumers across the globe who trust in Reliapart spares and accessories to get the job done.